Compact 240W industrial AC-to-DC power supply delivering regulated 48V output for industrial networking and control equipment. Built for DIN-rail installation with high efficiency, short-term peak-load capability, and integrated protection.
240W Continuous / 360W Peak
48V DC / 5A Ouput
93% Typical Efficiency
DIN-Rail Mounting
The LinkPower™ LPS-SDR-240-48 is a 240W industrial DIN-rail AC/DC power supply designed to provide stable 48V DC power in networking, automation, and equipmentenclosure applications. It accepts a wide 90–264V AC input and delivers 5A rated output current.
For intermittent peak demand, the unit supports up to 360W for three seconds, subject to the rated-average-power limit. Its adjustable 48–55V DC output, 93% typical efficiency, and DC OK relay contacts help support dependable system integration.
Built-in overload, overvoltage, short-circuit, and over-temperature protection are complemented by a −25°C to +70°C specified operating-temperature range. Output derating applies under certain conditions; consult the datasheet for design limits and installation clearances.
Provides a regulated 48V DC, 5A output with a 48-55V adjustment range and up to 360W peak output for three secomds.
Supports equipment with high short-duration startup or transient power requirements while maintaining a 240W continuous rating.
Integrated overload, overvoltage, short-circuit and overheat protection, plus DC Ok relay contacts for status signaling.
Simplifies DIN-rail integration and provides a useful relay status signal for system-level monitoring and troubleshooting.
| Rated Output | 48V DC, 5.0A / 240W |
| Peak Output | 360W for 3 seconds (7.5A) |
| AC Input | 90–264V AC, 47–63Hz |
| Output Adjustment | 48-55V DC |
| Operating Temperature | -13°F to +158°F (−25°C to +70°C) |
| Protections | Overload, overvoltage, short circuit, overheat |
| Dimensions | 126.6 H × 66.1 W × 111.0 D mm |
Contact our sales team to match the correct UPS system, battery
configurations and management option to your project requirements.
