Ultra-slim 24W DIN-rail DC-DC converter that steps a 48–60V DC input down to a regulated 12V DC output at 2A. Designed for space-constrained industrial and building automation cabinets with reinforced isolation and built-in electrical protection.
12V DC / 2A / 24W Ouput
48-60V DC Input
4kV DC I/O Isolation
DIN-Rail Mounting
The LinkPower™ LPS-DDR-12 is a compact 24W DC-DC step-down power converter that transforms 48–60V DC input into 12V DC at up to 2A. Its 35mm-wide housing minimizes DIN-rail space requirements in industrial control cabinets, network enclosures, and building automation systems.
The output is adjustable from 10.8 to 13.8V DC, with 89% typical efficiency and less than 0.3W no-load power consumption. The converter operates through free-air convection with a specified −30°C to +70°C temperature range, subject to derating.
For protection and installation confidence, the LPS-DDR-12 incorporates short-circuit, overload, and overvoltage protection, 4kV DC reinforced input/output isolation, a power-on LED, and screw-lock terminals. The datasheet specifies a three-year warranty.
Ultra-slim 35mm housing, 12V/2A output, 89% typical efficiency, and low no-load consumption for compact enclosures.
Converts an existing 48–60V DC source into the 12V power required by compatible low-voltage equipment.
Reinforced 4kV DC input/output isolation with built-in short-circuit, overload, and overvoltage safeguards.
Simplifies protected power integration using DIN-rail mounting, screw-lock terminals, and a visible power-status LED.
| Input Voltage | 48–60V DC |
| Rated Output | 12V DC / 2A / 24W |
| Typical Efficiency | 89% |
| Isolation | 4kV DC reinforced I/O isolation |
| Protection | Short circuit, overload, overvoltage |
| Operating Temperature | -22°F to 158°F (-30°C to +70°C) |
| Dimensions | 94.2 × 35 × 58.4 mm |
Contact our sales team to match the correct UPS system, battery
configurations and management option to your project requirements.
